Magneto-dynamic tool for full arch immediate loading in post-traumatic restoration with narrow implants: A case report.

New surgical techniques using narrow, tilted implants positioned through a magneto-dynamic tool in guided surgery for a Toronto restoration. A 69-year-old woman wanted fixed rehabilitation to replace her removable complete dentures. A cone-beam computed tomography showed significant bone resorption in both the maxillary and mandibular regions. The plan was to load the entire upper arch with six implants immediately, while removable partial dentures were recommended for the lower jaw. The guided surgery project was aligned with the new dentures, and the laboratory created a printed cast with dental implant analogues in planned positions. A metal-reinforced denture was constructed, and surgery was performed to place six narrow implants using the magneto-dynamic instrument. The denture was directly screwed onto multi-unit abutments. Final rehabilitation was completed after 6 months. Narrow implants can be a good option for fixed, full-arch rehabilitations. Further research is needed to confirm these findings on a larger scale.

Dental implant considerations in patients with systemic diseases: An updated comprehensive review.

BACKGROUND: Various medical conditions and the drugs used to treat them have been shown to impede or complicate dental implant surgery. It is crucial to carefully monitor the medical status and potential post-operative complications of patients with systemic diseases, particularly elderly patients, to minimize the risk of health complications that may arise. AIM: The purpose of this study was to review the existing evidence on the viability of dental implants in patients with systemic diseases and to provide practical recommendations to achieve the best possible results in the corresponding patient population. METHODS: The information for our study was compiled using data from PubMed, Scopus, Web of Science and Google Scholar databases and searched separately for each systemic disease included in our work until October 2023. An additional manual search was also performed to increase the search sensitivity. Only English-language publications were included and assessed according to titles, abstracts and full texts. RESULTS: In total, 6784 studies were found. After checking for duplicates and full-text availability, screening for the inclusion criteria and manually searching reference lists, 570 articles remained to be considered in this study. CONCLUSION: In treating patients with systemic conditions, the cost-benefit analysis should consider the patient's quality of life and expected lifespan. The success of dental implants depends heavily on ensuring appropriate maintenance therapy, ideal oral hygiene standards, no smoking and avoiding other risk factors. Indications and contraindications for dental implants in cases of systemic diseases are yet to be more understood; broader and hardcore research needs to be done for a guideline foundation.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns.

BACKGROUND: Yttrium-stabilized zirconia (YSZ) and alumina are the most commonly used dental esthetic crown materials. This study aimed to provide detailed information on the comparison between yttrium-stabilized zirconia (YSZ) and alumina, the two materials most often used for esthetic crowns in dentistry. METHODOLOGY: The ground-state energy of the materials was calculated using the Cambridge Serial Total Energy Package (CASTEP) code, which employs a first-principles method based on density functional theory (DFT). The electronic exchange-correlation energy was evaluated using the generalized gradient approximation (GGA) within the Perdew (Burke) Ernzerhof scheme. RESULTS: Optimization of the geometries and investigation of the optical properties, dynamic stability, band structures, refractive indices, and mechanical properties of these materials contribute to a holistic understanding of these materials. Geometric optimization of YSZ provides important insights into its dynamic stability based on observations of its crystal structure and polyhedral geometry, which show stable configurations. Alumina exhibits a distinctive charge, kinetic, and potential (CKP) geometry, which contributes to its interesting structural framework and molecular-level stability. The optical properties of alumina were evaluated using pseudo-atomic computations, demonstrating its responsiveness to external stimuli. The refractive indices, reflectance, and dielectric functions indicate that the transmission of light by alumina depends on numerous factors that are essential for the optical performance of alumina as a material for esthetic crowns. The band structures of both the materials were explored, and the band gap of alumina was determined to be 5.853 eV. In addition, the band structure describes electronic transitions that influence the conductivity and optical properties of a material. The stability of alumina can be deduced from its bandgap, an essential property that determines its use as a dental material. Refractive indices are vital optical properties of esthetic crown materials. Therefore, the ability to understand their refractive-index graphs explains their transparency and color distortion through how the material responds to light..The regulated absorption characteristics exhibited by YSZ render it a highly attractive option for the development of esthetic crowns, as it guarantees minimal color distortion. CONCLUSION: The acceptability of materials for esthetic crowns is strongly determined by mechanical properties such as elastic stiffness constants, Young's modulus, and shear modulus. YSZ is a highly durable material for dental applications, owing to its superior mechanical strength.

The effect of fibroblast growth factor-2 on the outcomes of tooth replantation: A systematic review of animal studies.

Background/Aim: The ideal treatment of tooth avulsion is replantation. However, replanting teeth may lead to root resorption. Fibroblast growth factor-2 (FGF-2) is a cytokine that plays an important role in wound repair and tissue regeneration. Recently, FGF-2 has been studied a potential regenerative agent to prevent root resorption and ankylosis. The aim of this review is to analyze and summarize the currently available literature focusing on using FGF-2 based regenerative modalities to improve the outcomes of tooth replantation. Materials and Methods: An electronic search was conducted via PubMed/Medline, Google Scholar and ISI Web of Knowledge, using the Medical Subject Headings (MeSH) terms "Basic fibroblast growth factor," "Fibroblast growth factor-2," "tooth replantation," and "replantation" for studies published between January 2001 and June 2021. Data was extracted and quality assessment was carried using the ARRIVE guidelines. Results: Nine animal studies were included in this review. In six studies, FGF-2 had a favorable effect on the tissue regeneration around roots of replanted teeth when compared to other treatment groups. However, quality assessment of the studies revealed many sources of bias and deficiencies in the studies. Conclusions: Within the limitations of this study, it may be concluded that FGF-2 may improve the outcomes of delayed replantation of avulsed teeth. However, more long-term animal studies, with improved experimental designs, and clinical trials are required to determine the clinical potential of the growth factor in improving the outcomes of delayed tooth replantation.

Cross Talk Between Cells and the Current Bioceramics in Bone Regeneration: A Comprehensive Review.

The conventional approach for addressing bone defects and stubborn non-unions typically involves the use of autogenous bone grafts. Nevertheless, obtaining these grafts can be challenging, and the procedure can lead to significant morbidity. Three primary treatment strategies for managing bone defects and non-unions prove resistant to conventional treatments: synthetic bone graft substitutes (BGS), a combination of BGS with bioactive molecules, and the use of BGS in conjunction with stem cells. In the realm of synthetic BGS, a multitude of biomaterials have emerged for creating scaffolds in bone tissue engineering (TE). These materials encompass biometals like titanium, iron, magnesium, and zinc, as well as bioceramics such as hydroxyapatite (HA) and tricalcium phosphate (TCP). Bone TE scaffolds serve as temporary implants, fostering tissue ingrowth and the regeneration of new bone. They are meticulously designed to enhance bone healing by optimizing geometric, mechanical, and biological properties. These scaffolds undergo continual remodeling facilitated by bone cells like osteoblasts and osteoclasts. Through various signaling pathways, stem cells and bone cells work together to regulate bone regeneration when a portion of bone is damaged or deformed. By targeting signaling pathways, bone TE can improve bone defects through effective therapies. This review provided insights into the interplay between cells and the current state of bioceramics in the context of bone regeneration.

Enhancing Oral Hygiene in Children With Hearing Impairment: The Impact of Skit Video Interventions -A Randomized Controlled Trial.

Aim. This study aimed to assess the effectiveness of 3 interventions-skit video, pictorial, and sign language-in improving the oral hygiene of children with hearing impairment. Materials and Methods. Sixty children randomly divided into 3 groups: Skit video, Pictorial, and Sign language. The mean gingival and Oral Hygiene Index scores were recorded before and after interventions. A 1-way ANOVA was used for statistically significant difference between pre and post intervention scores. Results. A significant difference in mean oral hygiene and gingival index scores before and after interventions was found in Group A (P < .005). A statistically significant difference was also found between group A and B in inter group comparison of OHI and GI scores post intervention (P < .004). Conclusion. Skit video and pictorial intervention effectively improves oral health resulting in reduced mean oral hygiene and gingival scores.

Smile aesthetics in Pakistani population: dentist preferences and perceptions of anterior teeth proportion and harmony.

BACKGROUND: This study aimed to evaluate dentist perceptions of attractive smiles in the Pakistani population, considering different dental proportions. METHODS: Maxillary casts and digital images were used to create symmetrical representations of anterior teeth. dentists' preferences for good and bad teeth proportions, width/height ratios, and various dental proportions (golden, recurring esthetic dental (RED), golden percentage, Preston, and local/observed) were assessed using one sample and paired t-test. The Chi-square test was used to determine the gender disparities and factors affecting smile attractiveness. A p-value of ≤ 0.05 was taken as significant. RESULTS: The RED proportion emerged as the preferred choice for normal-sized teeth, with specialists and general dentists favoring it over the golden proportion. For tall teeth, the golden proportion was predominantly preferred. The golden percentage received limited preference for aesthetic smile construction. CONCLUSIONS: The smiles created using the principles of RED proportion were opted as the most attractive by local dentists. Factors such as tooth arrangement, color, and midline were highlighted as essential considerations in aesthetic smile construction.

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG). METHODS: The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software. RESULTS: From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength. CONCLUSION: Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect. TRIAL REGISTRATION: PROSPERO registration number: CRD42021253707.

Finite element analysis of stress distribution on residual root structure in socket shield procedure following immediate dental implant placement: an in vitro study.

BACKGROUND: The success of implants in the socket shield technique relies on stress experienced by root fragments within the socket. Although there is no consensus on optimal root fragment thickness, varying thicknesses and dynamic implant placement induce stress in various directions and degrees. This study aimed to assess biomechanical response and stress distribution across different root fragment thicknesses in the socket shield procedure. METHODS: This in vitro study was conducted to assess and compare the stress distribution on residual root structures of varying thicknesses positioned within the labial aspect of the maxillary incisor socket during immediate implant placement of standard dimensions. The procedure involved applying an insertional torque of 40 Ncm, and the analysis was conducted using finite element analysis software. RESULTS: Utilizing the Numerical Technique with Abaqus software for explicit dynamics, von Mises stress and principal strain were analyzed on the root structure and bone under nonlinear contact conditions during implant torque application. For Model A, a loading torque of 40 Ncm was applied vertically on the implant, along with a horizontal force of 20 N on the root structure and bone. Results indicated maximum stress of 12.68 MPa on the root structure with a thickness of 0.5 mm and 5.61 MPa on the bone, with principal strains of 6.82E-03 and 4.10E-03, respectively. In Model B, with a root structure thickness of 1.0 mm, the maximum stress increased to 19.70 MPa, while the bone stress rose to 9.51 MPa, with principal strains of 1.03E-02 and 6.09E-03. Model C, with a root structure thickness of 1.5 mm, exhibited a maximum stress of 21.58 MPa on the root and 10.12 MPa on the bone, with principal strains of 1.16E-02 and 6.10E-03. Lastly, in Model D, with a root structure thickness of 2.0 mm, the maximum stress on the root structure and bone escalated to 28.74 MPa and 11.38 MPa, respectively, with principal strains of 1.55E-02 and 8.31E-03. CONCLUSIONS: As the thickness of the shield increases (ranging from 0.5 to 2 mm) in socket shield procedures with immediate implant placement, both stress on the root fragment and bone and principal micro-strain escalate. However, employing a shield thickness within the range of 0.5 to 2 mm does not lead to any adverse stress generation on the residual root fragment. However, for enhanced safety, it is recommended to restrict the maximum diameter and extension of the root fragment to 1.5 mm when considering implant sizes and socket diameter for the socket shield technique.

The effectiveness of botulinum toxin for temporomandibular disorders: A systematic review and meta-analysis.

OBJECTIVE: The current body of research on utilizing botulinum toxin (BTX) to manage temporomandibular disorders (TMDs) has not yet yielded definitive conclusions. The primary objective of this study was to determine the effectiveness of BTX in pain reduction for TMDs compared to placebo and other treatments. The secondary outcomes evaluated were adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. MATERIALS AND METHODS: A literature search was performed on PubMed, Dimension Publication, Scopus, and Google Scholar. The RoB 2 tool was used for quality assessment. The mean differences in pain scores were estimated to measure the effect of BTX on pain reduction. For adverse events, the risk ratio for the incidence of side effects was calculated. RESULTS: Two hundred and sixty non-duplicate articles were identified; however, only 14 RCTS were included in this review. The total study population included 395 patients. The overall risk of bias showed a low to moderate quality of evidence. Results from 6 studies were reported only narratively; four studies were used for meta-analysis on pain reduction, and five were used for meta-analysis on adverse events. The control used in the meta-analysis was placebo injections. Results of the meta-analysis for pain reduction were statistically insignificant for the BTX group with mean differences at MD = -1.71 (95% CI, -2.87 to -0.5) at one month, -1.53 (95% CI, -2.80 to -0.27) at three months, and -1.33 (95% CI, -2.74 to 0.77) at six months. This showed that BTX treatment was not significantly better than placebo for a reduction in pain scores at 1, 3, and 6 months. Regarding safety, the placebo group showed a relative risk of 1.34 (95%CI, 0.48-6.78) and 1.17 (95%CI, 0.54-3.88) at 1 and 3 months respectively. However, the risks were not statistically significant. There was also no difference in the effectiveness of BTX compared to placebo and other treatments for maximum mouth opening, bruxism events, and maximum occlusal force. CONCLUSION: BTX was not associated with better outcomes in terms of pain reduction, adverse events, maximum mouth opening, bruxism events, and maximum occlusal force. More high-quality RCTs are needed to better understand this topic.

IL-23/IL-17 axis levels in gingival crevicular fluid of subjects with periodontal disease: a systematic review.

BACKGROUND: The IL-23/IL-17 axis plays an important role in the immunopathogenesis of periodontal disease. A systematic review was conducted to synthesize all research reporting on the levels of the IL-23/IL-17 axis in gingival crevicular fluid (GCF) from subjects with gingivits, and periodontitis, compared to healthy controls. METHODS: The protocol followed the PRISMA, and Cochrane guidelines, and was registered with the Open Science Framework (OSF): https://doi.org/10.17605/OSF.IO/7495V . A search was conducted in the electronic databases PubMed/MEDLINE, Scopus, Google Schoolar, and Cochrane from November 15th, 2005, to May 10th, 2023. The quality of the studies was assessed using the JBI tool for cross-sectional studies. RESULTS: The search strategy provided a total of 2,098 articles, of which 12 investigations met the inclusion criteria. The total number of patients studied was 537, of which 337 represented the case group (subjects with gingivitis, and chronic periodontitis), and 200 represented the control group (periodontally healthy subjects). The ages of the patients ranged from 20 to 50 years, with a mean (SD) of 36,6 ± 4,2, of which 47% were men, and 53% were women. 75% of the investigations collected GCF samples with absorbent paper strips, and analyzed cytokine IL-17 levels individually. In addition, qualitative analysis revealed that there are differences between IL-23/IL-17 axis levels in subjects with chronic periodontitis, gingivitis and healthy controls. CONCLUSIONS: Thus, IL-23/IL-17 axis levels could be used in the future as a diagnostic tool to distinguish between periodontal diseases.

The Analysis of Intermolar Width and Skeletal Base Class as a Predictor of Potential Maxillary Canine Impaction in Permanent Dentition: A Cross-Sectional Study.

Objectives. This study aimed to analyze the inter-molar width and skeletal base class to predict maxillary canine impaction in permanent dentition. Methods. This cross-sectional study was carried out between September 2021 to March 2022. Patients aged between 13 and 20 years were recruited. These patients' cone-beam computer tomography(CBCT), lateral cephalogram, and dental casts were collected and analyzed. For statistical analysis, T-test and Chi-square tests were applied. Results. A total of 92 patients were enrolled in this study. Inter-molar width was significantly decreased in patients with impacted canine(P < .001). The skeletal base classification was statistically significant when compare with intermolar width(P < .05). The location of impaction (P = .060), type of impaction(P = .435), and side of impaction(P = .239) were determined to be statistically insignificant. Conclusion. The Inter-molar width was decreased in patients with impacted canine; therefore, it may be a potential risk factor. The skeletal classification was found to affect inter-molar width in impacted canine patients.

Analysis of shade-matching ability in dental students: a comparative study under clinical and correcting light conditions.

BACKGROUND: Selecting the ideal tooth shade is essential to the success of aesthetic dental restorations. Students' cognitive abilities are involved in the multifaceted and intricate process of shade matching. Hence, the present study aimed to assess and compare the shade-matching ability of undergraduate dental students in various years of dental education under clinical and correcting light. METHODS: This comparative cross-sectional study was instigated amongst male 4th, 5th, and 6th-year students of the dental complex of King Faisal University, Kingdom of Saudi Arabia. A total of 72 male dental students assessed the shade under clinical (fluorescent light) and correcting light (handheld Dental Base Light) by using VITA Classical shade guides. Statistical analysis was done using SPSS version 23 (Armonk, NY, USA). The Chi-square test was used to evaluate the association between correct and incorrect shade matching under correcting and clinical light. RESULTS: Out of 72 male students, 22(30.6%) were from the 4th year, 26(36.1%) were from the 5th year, and 24(33.3%) were from the 6th year, with a mean age of 22.92 ± 1.01 years. The majority of the 6th-year students selected shade of anterior tooth # 11 correctly under clinical and correcting light, and 3(12.5%) students selected incorrectly under clinical and correcting light, with a statistically significant association among them (p = 0.004). As far as the shade selection of the posterior tooth is concerned, a statistically significant difference was observed under clinical light among all clinical students (p = 0.008). CONCLUSION: The clinical performance of dental students in shade matching improved with advancing years of dental education. Additionally, the shade matching ability of all groups of dental students was superior under correcting light compared to conditions under clinical light.

Oral findings and comprehensive dental management of Moebius syndrome: a systematic review.

BACKGROUND: Moebius syndrome (MS) is a rare, non-progressive, neuromuscular, congenic disease involving the oral maxillofacial region. The present study aimed to describe the oral and extraoral findings in MS patients and their comprehensive dental management. METHODS: A digital search was carried out in PubMed/MEDLINE, Scopus, Web of Science, and Google Scholar, restricted to articles in English from Jan 01, 2000, to Apr 02, 2023, following PRISMA guidelines. The methodological quality of the studies was evaluated following the JBI guidelines. Qualitative analysis was carried out on the overall result, extraoral and intraoral manifestations, considering dental management as appropriate. RESULTS: Twenty-three studies were included, and a total of 124 cases of patients with MS were analyzed. The 82% of patients with MS were younger than 15 years of age. The most frequent extraoral manifestations were blinking and visual problems (78,22%), malformations of the upper and lower limbs (58,22%), bilateral facial paralysis (12,90%), lack of facial expression (12.09%), and unilateral facial paralysis (6,45%). On the other hand, the most frequent oral manifestations were tongue deformities (78,22%), micrognathia (37,90%), labial incompetence (36,29%), cleft palate (22,87%), gothic palate (16,12%), microstomia (15,32%), anterior open bite (15,32%), dental caries (8,87%), and periodontal disease (8,06%). The majority of MS patients were treated by pediatric dentistry (60,86%), using a surgical approach (56,52%), and orthodontic and orthopedic maxillary (43,47%) followed by restorative (39,13%), and periodontal treatments (21,73%). CONCLUSIONS: This systematic review demonstrates that patients with MS present a wide variety of oral and extraoral manifestations, for which dental treatments are planned and tailored to each patient in accordance with oral manifestations. These treatments encompass problem resolution and oral health maintenance, incorporating recent techniques in managing and treating patients with MS.

Improved ridge width with tenting screw bone augmentation using particulate and block grafts: A case report.

The objective of this case report is to present the use of tenting screw bone augmentation technique for the rehabilitation of narrow horizontally deficient mandibular ridges and to evaluate the feasibility and outcomes of this approach in achieving sufficient bone volume for successful implant placement and Osseointegration. A 34-year-old woman with no significant medical history presented with bilaterally missing teeth in the lower arch. A comprehensive treatment plan was developed through assessment and Cone Beam Computed Tomography (CBCT) imaging to evaluate the ridge dimensions and plan the treatment accordingly accurately. The tenting screw technique, utilizing autogenous/autologous+allograft materials, was chosen for horizontal ridge augmentation. Bone augmentations were performed simultaneously bilaterally using tenting screws. After a 20-week healing period, CBCT scans revealed favorable bone regeneration with adequate width for successful implant placements. This case report demonstrates the potential of tenting screw bone augmentation in effectively rehabilitating mandibular ridges and achieving optimal dental implant outcomes. Further research is needed to validate these findings and assess the long-term stability and success of this technique.

The role of physiotherapy interventions in the management of temporomandibular joint ankylosis: a systematic review and meta-analysis : Running title: Physiotherapy in TMJ ankylosis.

BACKGROUND: The main aim of this systematic review and meta-analysis was to identify peer-reviewed scholarly journal articles reporting the significance of physiotherapy interventions in managing TMJ ankylosis. In addition, this study aimed to critically appraise the existing evidence on the prevalence and clinical presentation, physiotherapy intervention approaches, efficacy of physiotherapy interventions, adverse effects, and safety of physiotherapy interventions in TMJ ankylosis management. METHODS: An all-inclusive literature search was conducted using the PubMed, Google Scholar, and Scopus electronic databases. The researchers screened the potential articles and assessed for eligibility based on the reported inclusion and exclusion criteria. The quality evaluation tool for observational cohort and cross-sectional studies developed by the National Institutes of Health (NIH) and the Cochrane Collaboration's Risk of Bias Tool were used to assess the quality of the included studies. Researchers also comprehensively analyzed the data, reported the results, and discussed them according to the predominant themes. RESULTS: The primary electronic database search yielded 409 articles, of which 25 were included in this review. A secondary search was conducted from citations of the included studies, yielding 74 articles, of which six were included in the study. A significantly higher prevalence of bony ankylosis than fibrous ankylosis, with an overall effect size of p < 0.00001. In addition, there were significantly more unilateral than bilateral presentations with an overall effect size of p < 0.00001. Moreover, there were 78 reported complications out of 245 subjects according to five included studies demonstrating a significant effect size with p = 0.001 following the treatment protocols. CONCLUSION: This study highlighted the prevalence of bony ankylosis in temporomandibular joint ankylosis, emphasizing its impact on patients' well-being. On the other hand, the results show that physiotherapy is essential to optimize postoperative outcomes and minimize adverse events such as re-ankylosis. Practitioners and healthcare professionals must monitor postoperative recovery and ensure strict adherence to physiotherapy protocols for optimal outcomes.

The role of the CX3CL1/CX3CR1 axis as potential inflammatory biomarkers in subjects with periodontitis and rheumatoid arthritis: A systematic review.

OBJECTIVE: This systematic review aimed to investigate the role of the C-X3-C motif ligand 1/chemokine receptor 1 C-X3-C motif (CX3CL1/CX3CR1) axis in the pathogenesis of periodontitis. Furthermore, as a secondary objective, we determine whether the CX3CL1/CX3CR1 axis could be considered complementary to clinical parameters to distinguish between periodontitis and rheumatoid arthritis (RA) and/or systemically healthy subjects. METHODS: The protocol used for this review was registered in OSF (10.17605/OSF.IO/KU8FJ). This study was designed following Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines. Records were identified using different search engines (PubMed/MEDLINE, Scopus, Science Direct, and Web of Science) from August 10, 2006, to September 15, 2023. The observational studies on human subjects diagnosed with periodontitis and RA and/or systemically healthy were selected to analyze CX3CL1 and CX3CR1 biomarkers. The methodological validity of the selected articles was assessed using NIH. RESULTS: Six articles were included. Biological samples (gingival crevicular fluid [GCF], saliva, gingival tissue biopsies, serum) from 379 subjects (n = 275 exposure group and n = 104 control group) were analyzed. Higher CX3CL1 and CX3CR1 chemokine levels were found in subjects with periodontitis and RA compared with periodontal and systemically healthy subjects. CONCLUSION: Very few studies highlight the role of the CX3CL1/CX3CR1 axis in the pathogenesis of periodontitis; however, increased levels of these chemokines are observed in different biological samples (GCF, gingival tissue, saliva, and serum) from subjects with periodontitis and RA compared with their healthy controls. Future studies should focus on long-term follow-up of subjects and monitoring changes in cytokine levels before and after periodontal therapy to deduce an appropriate interval in health and disease conditions.

The efficacy of iatrosedation and music listening techniques in attenuating dental anxiety in patients undergoing dental crown preparation: A randomized clinical trial.

Dental anxiety is a common problem encountered in dental clinics that affects both patients and dentists. Adequate management of dental anxiety is critical for optimal treatment outcomes for the patient. This study aims to assess the efficacy of two anxiety-reduction techniques (iatrosedation and music listening) for dental crown preparation in adult patients. In this clinical trial, 60 patients were randomly assigned to three groups: Group 1, iatrosedation; Group 2, music listening; and Group 3, control. Patients in all three groups underwent dental crown preparation. To measure the anxiety levels of the patients, heart rate was calculated using a pulse oximeter, and verbal rating scale scores were assessed. One-way analysis of variance, post hoc analysis, and Spearman's correlation were used to compare the mean values of the three groups. Significant differences were observed in the heart rate and verbal rating scale scores among individuals in the study groups. A more substantial reduction in anxiety levels was found in patients exposed to iatrosedation (Group 1), which was followed by music listening (Group 2). Recorded heart rate and verbal rating scores were the highest in the control group patients. The iatrosedation technique significantly reduced dental anxiety for patients undergoing dental crown treatment; however, music listening was less effective than iatrosedation. Educating patients regarding the dental care they are about to receive is vital for reducing their anxiety.

The effect of photobiomodulation therapy in common maxillofacial injuries: Current status.

The use of photobiomodulation therapy (PBMT) may be used for treating trauma to the maxillofacial region. The effects of PBMT on maxillofacial injuries were discussed in this review article. The electronic databases Pubmed, Scopus, and Web of Science were thoroughly searched. This review included in vitro, in vivo, and clinical studies describing how PBMT can be used in maxillofacial tissue engineering and regenerative medicine. Some studies suggest that PBMT may offer a promising therapy for traumatic maxillofacial injuries because it can stimulate the differentiation and proliferation of various cells, including dental pulp cells and mesenchymal stem cells, enhancing bone regeneration and osseointegration. PBMT reduces pain and swelling after oral surgery and tooth extraction in human and animal models of maxillofacial injuries. Patients with temporomandibular disorders also benefit from PBMT in terms of reduced inflammation and symptoms. PBMT still has some limitations, such as the need for standardizing parameters. PBMT must also be evaluated further in randomized controlled trials in various maxillofacial injuries. As a result, PBMT offers a safe and noninvasive treatment option for patients suffering from traumatic maxillofacial injuries. PBMT still requires further research to establish its efficacy in clinical practice and determine the optimal parameters.